loading 'acpiphp' fails after the system boot?‏

[Shiro Itou 伊東]

Hi All,
 
In kernel version 3.0, when ‘apciphp’ driver module is loaded, after the system comes up, it fails with error “no such device”. When I tried to debug I see that it fails in acpiphp_get_num_slots () function with error "Total 0 slots". In this case ‘bridge_list’  seem to be NULL.
 
But when the ‘acpiphp’ is loaded during boot time,  it seems to work file.
 
Where does the ‘bridge_list’ get populated and why does loading ‘apciphp’ after the system comes up fails to load.
 
Regards,
Shiro ��칻�&�~�&���+-��ݶ��w��˛���m�b��a��e�����ܨ}���Ơz�&j:+v�������zZ+

[g***@linuxfoundation.org]

On Tue, Sep 10, 2013 at 08:43:05AM -0700, Shiro Itou =E4=BC=8A=E6=9D=B1=

Post by Shiro Itou 伊東
Hi All,
=C2=A0
In kernel version 3.0, when =E2=80=98apciphp=E2=80=99 driver module i=

s loaded, after

Post by Shiro Itou 伊東
the system comes up, it fails with error =E2=80=9Cno such device=E2=80=

=9D. When I

Post by Shiro Itou 伊東
tried to debug I see that it fails in acpiphp_get_num_slots ()
function with error "Total 0 slots". In this case =E2=80=98bridge_lis=

t=E2=80=99 =C2=A0seem

Post by Shiro Itou 伊東
to be NULL. =C2=A0
But when the =E2=80=98acpiphp=E2=80=99 is loaded during boot time, =C2=

=A0it seems to work file.

What happens in the 3.11 kernel release? Lots of work has been done in
this area in the past 2 years, please try a newer kernel. If there are
still problems, please let the linux-***@vger.kernel.org mailing list
know about it.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" i=
n
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Shiro Itou 伊東]

----------------------------------------

Date: Tue, 10 Sep 2013 08:51:03 -0700
Subject: Re: loading 'acpiphp' fails after the system boot?‏

Post by Shiro Itou 伊東
Hi All,
In kernel version 3.0, when ‘apciphp’ driver module is loaded, after
the system comes up, it fails with error “no such device”. When I
tried to debug I see that it fails in acpiphp_get_num_slots ()
function with error "Total 0 slots". In this case ‘bridge_list’ seem
to be NULL.
But when the ‘acpiphp’ is loaded during boot time, it seems to work file.

What happens in the 3.11 kernel release? Lots of work has been done in
this area in the past 2 years, please try a newer kernel. If there are
know about it.

Thank you for reply. I did not try 3.11 kernel. I will check 3.11 kernel and see. But I use 3.0 kernel as a requirement.

Thank You,
Shiro

thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
More majordomo info at http://vger.kernel.org/majordomo-info.html ��칻�&�~�&���+-��ݶ��w��˛���m�b��Zr����^n�r���z���h�����&���G���h�

[g***@linuxfoundation.org]

On Wed, Sep 11, 2013 at 10:46:19AM -0700, Shiro Itou =E4=BC=8A=E6=9D=B1=

Post by Shiro Itou 伊東
----------------------------------------

Date: Tue, 10 Sep 2013 08:51:03 -0700
Subject: Re: loading 'acpiphp' fails after the system boot?=E2=80=8F
On Tue, Sep 10, 2013 at 08:43:05AM -0700, Shiro Itou =E4=BC=8A=E6=9D=

Post by Shiro Itou 伊東
Hi All,
In kernel version 3.0, when =E2=80=98apciphp=E2=80=99 driver modul=

e is loaded, after

Post by Shiro Itou 伊東

Post by Shiro Itou 伊東
the system comes up, it fails with error =E2=80=9Cno such device=E2=

=80=9D. When I

Post by Shiro Itou 伊東

Post by Shiro Itou 伊東
tried to debug I see that it fails in acpiphp_get_num_slots ()
function with error "Total 0 slots". In this case =E2=80=98bridge_=

list=E2=80=99 seem

Post by Shiro Itou 伊東

Post by Shiro Itou 伊東
to be NULL.
But when the =E2=80=98acpiphp=E2=80=99 is loaded during boot time,=

it seems to work file.

Post by Shiro Itou 伊東

What happens in the 3.11 kernel release? Lots of work has been done=

in

Post by Shiro Itou 伊東

this area in the past 2 years, please try a newer kernel. If there =

are
st

Post by Shiro Itou 伊東

know about it.

=20
Thank you for reply. I did not try 3.11 kernel. I will check 3.11
kernel and see. But I use 3.0 kernel as a requirement.

Then please contact the people who is in charge of that requirement, as
they are the only ones that can support you, the community can not.

Best of luck,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug=
" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html