Timo
2012-11-16 12:31:29 UTC
Hi,
I have an Intel motherboard DQ77KB which has a 2-pin header which says
panel_off and a fresh Ubuntu 12.10 (3.5.0-18-generic
) install and a display connected via Displayport (DP1, not eDP1). If I
connect the header in the running system a kworker process pops up with
100% cpu usage. If I leave the header unconnected no kworker process
runs, which is good, but a pitch noise comes from the motherboard,
probably from some voltage regulators.
I am no programmer, and I don't understand much about the kernel. But I
would like to get the problem solved. If I can be any help, please let
me know.
Kind regards
Timo
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
I have an Intel motherboard DQ77KB which has a 2-pin header which says
panel_off and a fresh Ubuntu 12.10 (3.5.0-18-generic
) install and a display connected via Displayport (DP1, not eDP1). If I
connect the header in the running system a kworker process pops up with
100% cpu usage. If I leave the header unconnected no kworker process
runs, which is good, but a pitch noise comes from the motherboard,
probably from some voltage regulators.
I am no programmer, and I don't understand much about the kernel. But I
would like to get the problem solved. If I can be any help, please let
me know.
Kind regards
Timo
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html